Paper Settings

By registering the size of the paper loaded on the rear tray, you can prevent the printer from misprinting by flashing Alarm lamp and Paper lamp before printing starts when the paper size of the loaded paper differs from the print settings.

Media type is set depending on the paper size registered in the printer.

Paper size	Media type
A4, LTR	Plain paper
KG, 4"x6"/10x15cm	Photo paper

To register the size of the paper loaded on the rear tray in the printer:

After loading paper on the rear tray, either of the Paper lamp lights up according to the paper size loaded last.

If the paper size loaded on the rear tray is different from the Paper lamp indication, press the Paper Select button to change the selection.

When the paper size setting for printing is different from the paper size registered in the printer:

Ex:

Paper size setting for printing: KG
Paper size registered in the printer: A4

When you start printing, the Alarm lamp and the Paper lamp indicating the paper size setting for printing flashes in synchronization.

Select one of the operations below.

Printing on the paper loaded on the rear tray

You print on the paper loaded without changing the paper size setting for printing. Press the RESUME button.

For example, when the paper size setting for printing is KG and the paper size registered in the printer is A4, the printer starts printing on the paper loaded on the rear tray without changing the paper size setting for printing.
Printing after replacing paper

You print after replacing paper loaded on the rear tray.

For example, when the paper size setting for printing is KG and the paper size registered in the printer is A4, you load KG sized paper before you start printing.

After replacing the paper, register the size of the paper loaded on the rear tray in the printer.
Cancel printing

Press the ON/Stop button to cancel printing and change the paper size setting for printing. Try printing again.

Default Setting for Flashing Alarm Lamp which Prevents Misprinting

When you print from Windows:

The Alarm lamp flashing which prevents misprinting is disabled by default.

To change the setting:
- Changing the Printer Operation Mode
When you print from macOS:

The Alarm lamp flashing which prevents misprinting is enabled by default.

To change the setting:
- Changing the Printer Operation Mode

Important

When the Alarm lamp flashing which prevents misprinting is disabled:

The printer starts printing even though the paper size setting for printing and the paper size registered in the printer are different.